Material Saftey Data Sheet - Aniseed, Star


Identification:

Material Name:Aniseed, Star

Botanical Name:Illicium verum

CAS ID:8007-70-3

FEMA ID:2094

Aroma ID:151


Physical Data:

Appearance:Clear pale straw liquid congealing below 59F

Boiling Point:

Melting Point: 59 °F

Vapor Density:Air

Vapor Pressure:N/F mmhg at N/A Celcius

Water Solubility:Unsoluble


Fire / Explosion / Reactivity:

Melting Point:

DOT Classification:

Stability:Stable

Decompostion:Forms carbon monoxide and/or dioxide upon buring

Polymerization:

Conditions:Liquid may cause dermatitis and /or irritate eyes. Do not give/use on children


Extinguishing Media:

Water/Fog:

Foam:Yes

Carbon Dioxide:Yes

Dry Chemical:Yes


Protection Information:

Respiration:Avoi d casual breathing

Ventilation:Follow good industrial practices. Remove any one exhibiting problems to well ventilated area

Skin:Wash with soap and water

Eyes:Flush in accordance with normal first aid methods

Other:Store in tightly sealed containers Do not expose product to temperatures above 95F


Health Hazards:

Material Type:Natural essential oil.

General:Liquid may be irritating to skin and eyes. Repeated contact may cause allergic dermatological reaction.

Entry Routes:Inhalation, Skin


First Aid:

Inhalation:Remove to fresh air and call a physician.

Eye Contact:Remove contact lenses and flush eyes with cool water for at least 15 minutes. If irritation persists, call a physician.

Skin Contact:Remove contaminated clothing and shoes. Wash skin with mild soap and water.

Ingestion:Rinse mouth, consult a physician.


Occupational Exposure Limits:

Threshold Limit:NA

OSHA PEL:NA

Carcinogen:NO


Spills / Leaks / Disposal:

Procedure:First remove all potential sources of ignition. Small spills or leaks should be wiped up with paper towels or rags and placed in approved containers. For larger spills use a non-flammable absorbent and dispose of in accordance with federal, state and local laws.


Shipping / Handling:

Procedure:Store in tightly sealed containers in cool dry area. Do not expose to ignition heat or direct sunlight. Follow good industrial and hygienic practices.


SARA 313 Chemical Breakdown:

SARA Concentration:None


Disclaimer:

The information contained in this Material Safety Data Sheet was obtained from current and reliable sources. This data is supplied without warranty, expressed or implied, regarding its correctness or accuracy. It is the user’s responsibility to determine safe conditions for use of this product and to assume liability for loss, injury, damage or expense resulting from improper use of this product.